The Story

Some years ago Stuart brought a none working 2 Player House of the Dead 2, Siting, light gun arcade machine. It had pretty much reached the end of its life as a working unit. The rear projection screen was missing, the guns and PCB were done for. The cabinet was filthy and most of the artwork was destroyed, but despite all this Stuart could see a glimmer of inspiration in the husk and decided to keep it at the back of the workshop until the time was right and an idea had been formed.

 

3 years later, I joined Stuart at Retro Leisure and after 6 months at The University of Stu and much tidying up of the workshop, Stu thought it was a good time bring out the cab and introduce me to something I’ve never seen before. After moving arcade machines around the warehouse for an hour and a half, like a giant game of Tetris, moving one machine a couple of meters before slotting it into the space where another had been, we reached the the back of the warehouse.  It looked like a big red shitted up photo-booth, it had collected a thick protective layer of dust and other stuff all over it. May first thought was “that looks heavy”.

arcade console in warehouse

We dragged it out into the light, removed all the rubbish from inside, cleaned it up a little and lelt it sitting there for a week, while we both had a good think about what we should do with it.

The Idea

Well, after about month of brain storming, discussion, arguments and shouting, interspersed with lots of tea and rethinking we came up with a plan we both agreed on… sortof.

What we decided to do was to convert the old House of the Dead 2, Siting, light gun arcade machine into the uber funk of all arcade, multi game, PC, light gun, console and media experience. kind of an immersive games room that could house all your favorite games regardless of their platform or architecture.

We wanted this machine to be the kind of experience that you’d be willing to knock down walls in your house to get it inside. One that would be simple to use, but be so much fun that your mates would genuinely be in ore.

One of longest discussions, cough, me and Stu had was about the decoration and artwork for the cab. This ranged from reproducing the original artwork to a full Baroque gold leaf interior with a stocked fridge,automatic retracting keyboard and rear Cadillac car seat. In the end we went for a black interior, tailored black and red cushions for the seat and something cool for the controls console.

For the exterior we decided to keep some of the better artwork and remove the rest. The new blank space could be decided by the future buyer, we’d offer a customisation package included for free, one matched to their tastes.

So what will it do?

When building this machine we’re going to incorporate the following features:-

  • 50 inch Full HD Screen
  • Have a full 2 player arcade quality control panel with 6 buttons for each player
  • A built in trackball and buttons
  • All buttons and tracker will be illuminated with bright red LEDs
  • Calibrated light gun
  • Build in PC to run custom mame setup, media and PC games
  • Full 5.1 surround sound amplifier and speakers
  • Bass Sub Amp, Speakers built into seat, so you feel the sound
  • Built in power, HDMI and USB sockets.
  • Space for two consoles to be integrated neatly and easily
  • Storage cupboard for peripherals
  • Sound reactive lighting and controller
  • Black cushioned seats with bright red piping
  • Custom exterior artwork, chosen by the buyer

That’s about it for now but this list might get longer.

Screen

Originally this arcade machine would of had a rear projection screen but when it came to us it had a big hole where the screen should be, so we filled it with a 50″ LED 1080p Screen.

Side art will need a touch up.

Console

This machine doesn’t have a console, it does have a long slab of steel…

and here’s what we did with it.

 

 

First Design an overlay for the console.

Next measure and cut all holes.

Print a draft overlay to make sure everything fits.


All’s good so print, laminate and fit overlay.

 

Time to fit the buttons, joysticks and tracker ball.

Wiring loom up next.

Arcade Machine Console wiring start

I think you get the idea.

How we got a nice console we need somewhere to put it. This is our starting point

Demolition

 

And now for the amp cupboard, storage and PC housing.

Install a capable PC.

Front surround sound speakers installed, and console installed.

 

Lets have a look at the seating section of the machine.

Clean, prep, paint, clean, tidy.

 

More to come…

 

Related Posts

New Builds and Projects

MP3 Digital Jukebox Custom Finish

Here we have a very tidy MP3 digital jukebox with custom in house printed artwork.Relive that feeling of using a pub jukebox, but in your own home, garage, cave, hovel or mansion.Just copy your existing Read more…

New Builds and Projects

Point Blank 2 Arcade Machine Build

We’ve just finished building a reproduction of one of my favourite arcade machines, Point Blank 2. Now this isn’t a normal repro, this ones had a massive amount of man hours go into making it. Read more…

New Builds and Projects

CD Jukebox to Digital Jukebox Conversion

We converted this formerly very broken CD jukebox into a digital jukebox. It still functions just like the original jukebox. The albums are displayed on the screen in the style of the CD flippers. Just Read more…